MARINE  ENGINE  MODEL  460L-50

     

                                                                                                                  HORSEPOWER CURVE

 Engine General Specifications: 2-Cycle, In-line, Water Cooled, Piston Ported, Cast Aluminum Construction, Cast Iron Cylinder Liners, Ball and Needle Bearings.

 Engine Standard  Equipment: Diaphragm Type Carburetor,  Flame Arrester Air Filter, Impulse Fuel Pumps, Cold Start Fuel Primer, Electronically Controlled Capacitive Discharge Ignition, Water-tight Electronics Compartment, All-weather Electrical Harnesses and Connectors, Complete Tuned Water-cooled Exhaust System, Electric Start, 120 Watt Charging System with Electronic Regulator / Rectifier.

 Technical  Data:

 BORE  69.5 mm (2.74 in.) · STROKE  60.0 mm (2.36 in.) · DISPLACEMENT 455 cc (27.8 cu. in.)

 FUEL  REQUIREMENT  92 Octane Minimum  ·  OIL  REQUIREMENT  NMMA TC-W3 @ 50:1

 OUTPUT SHAFT 30mm Dia. 10:1 Taper ½ -20 NF Internal Threads  ROTATION Counter-clockwise

 TEMPERATURE  MAXIMUM  LIMITS:   

               CYLINDER  HEAD TEMPERATURE      205 0 C (400 0  F)

LIQUID  COOLANT  TEMPERATURE     88 0 C (190 0  F)

 Performance  Data:

 POWER 50.0 BHP @ 6750 RPM · TORQUE 39.8 ft.-lbs. @ 6000 RPM · MAX. SPEED 6900 RPM

 Design Dimensions: 

Engine Accessory End View            Engine Exhaust Side View

                   

  Engine Crankcase Base Mounting

 Gross dimensions given in inches (± 0.125 inch).  Detailed engineering drawings available to qualified manufacturers. Exhaust configurations vary according to application. See also JP-2 Jet Pump and Engine & Jet Pump Packages.

Manufactured in U.S.A. by 2 Stroke  International, Beaufort, SC       (Solely owned and operated by AMW Cuyuna Engine Co., Inc.)

[Home]  [Overview]  [Products]  [Applications]  [News Releases]  [Contacts]