Engine Models 460F-35 and 460FE-35

Sport Configuration

               Engine Model 460F-35                                    460FE-35 (With optional Electric Start

General Specifications:    35 Horsepower, Two Cylinders, Cast Iron Liners, Fan Cooled,

    Piston Ported, Heavy-duty Ball Main Bearings, Needle Rod Bearings.

 Standard  Equipment: Slide Type Carburetor, Air Filter, Impulse Fuel Pump, Recoil Start,

                                                 CDI Ignition System, Complete Tuned Exhaust System. 

 Technical  Data:

 BORE  69.5 mm (2.74 in.)  ·  STROKE  60.0 mm (2.36 in.)  ·  DISPLACEMENT  455 cc (27.8 cu. in.)

 FUEL  REQUIREMENT   92 Octane Minimum    ·    OIL  REQUIREMENT    NMMA TC-W @ 50:1

 OUTPUT  SHAFT:   30mm Dia. 10:1 Taper ½ -20 NF Internal Threads            ·          COOLING:  Fan

 ROTATION:  Counter-Clockwise (facing PTO end)    

 APPROX.  WEIGHT:      Base Weight 55 lbs. (24.9 kg),  Engine with Standard Equipment  66.0 lbs. (29.9 kg) 

 TEMPERATURE  MAXIMUM  LIMITS:   CHT  400 ⁰  F  (205 ⁰ C)   EGT  1,200 ⁰  F  (650 ⁰C)          

Performance  Data:

 HORSEPOWER    35.0 BHP @ 6,000 RPM          MAXIMUM  TORQUE  31.7 ft.- lbs. @ 5,500 RPM      

 MAXIMUM  SPEED   6,500 RPM                  T.B.O.  Top End = 500 Hours, Bottom End = 1,000 Hours

Engine Models 460F-35 and 460FE-35 (Sport) Options:

PUSHER  or  TRACTOR  CONFIGURATION ………...…. Different Cooling Fan Airflow & Exhaust

MOUNTING  POSITIONS …………………………………..……….…… Upright, Inverted or Vertical

BELT  REDUCTION  DRIVE*  (7.5 lbs.) ….………..………………………... Reduction  Ratio  2.50:1

GEARBOX  REDUCTION*  (12.5 lbs.) …………..…....……… Ratios Available 2.04:1, 2.65:1, 3.06:1

DRIVE  HUB  (1.0 lb.) ……..……….......… 6-Hole (8 mm) on 75mm Bolt Center with 1 in. Pilot

                                  …………...... 4-Hole  (8 mm) on  79.4 mm Bole Center with 1 in. Pilot

 CHARGING  SYSTEM  150  WATT / C.D. IGNITION (5.0 lbs.) Order Engine Model  460FE – 35

ELECTRIC  START (12.0 lbs.) ………………………………………… Cannot be used with Belt Drive

 *Detailed Data Sheets available for Belt Drive and Gearbox Reduction Units. 

   No representation of suitability for any application is implied. Data and specifications are provided for the

   purchaser, who is ultimately responsible for decisions as to suitability of 2si products for his/her usage.

 Gross dimensions given in inches.

Manufactured in USA by 2 Stroke  International, Beaufort, SC     Data, specs and availability subject to change.     (Rev. 07/01)

[Home]  [Overview]  [Products]  [Applications]  [News Releases]  [Contacts]